To start the driver, you must specify the name of the port on which the Zigbee-module (stick) is connected. Please refer to the respective documentation on this page with regards to the state of the integration into the zigbee-herdsman and zigbee-herdsman-converters libraries. Support for these chipsets is experimental. While Conbee/RaspBee Support is no longer considered experimental in the zigbee-herdsman and zigbee-herdsman-converters libraries used by the zigbee Adapter, use of these devices with the adapter may limit functionality. Only CC26xx/cc1352/cc2538 Devices support extraction of the NVRam backup which should allow to swap coordinator hardware without having to reconnect all zigbee devices to the network.Ĭurrent firmware files for these devices can be found on GitHub Devices based on cc253x chips are still supported but are no longer recommended. Recommended devices are based on either the CC2652 or CC1352 chip.
A list of supported coordinators, the necessary equipment for the firmware and the device preparation process for different coordinator devices are described here (in English) or here (in Russian) Texas Instruments SoC The device must be flashed with the respective coordinator firmware. One coordinator device is required for each zigbee Adapter instance. About the device Zigbee-network can be read here (in English).
#TI CONNECT 1.6.1 DRIVER#
By work directly with the coordinator, the driver allows you to manage devices without additional application / gateways / bridge from device manufacturers (Xiaomi / TRADFRI / Hue / Tuya).
With the Zigbee-coordinator based on Texas Instruments SoC, deCONZ ConBee/RaspBee modules, Silicon Labs EZSP v8 or ZIGate USB-TTL it creates its own zigbee-network, into which zigbee-devices are connected.
IoBroker adapter for Zigbee devices via TI cc2531/cc2530/cc26x2r/cc2538 and deCONZ ConBee/RaspBee.
0 kommentar(er)
